All Issue

2018 Vol.34, Issue 12 Preview Page
December 2018. pp. 133-143
Abstract

수평하중에 대한 말뚝의 휨강도를 증대시키기 위해 얇은 두께의 강관 내부에 PHC말뚝을 합성한 콘크리트 충전 강관(PCFT)말뚝이 개발되었다. PCFT말뚝의 휨강도를 강관말뚝과 비교하기 위하여 직경이 동일한 PCFT말뚝과 강관말뚝에 대해 휨강도시험을 수행함과 동시에 한계상태설계법으로 P-M 상관도를 작도하였다. 그리고 PCFT말뚝의 하단에 PHC말뚝을 연결한 PCFT 복합말뚝의 수평지지력과 수평거동을 기존의 강관 복합말뚝(HCP) 및 강관말뚝과 비교하기 위하여 총 4본의 시험말뚝을 시공하고 수평재하시험을 수행하였다. 휨강도시험 결과 PCFT말뚝의 휨강도는 두께 12mm의 강관말뚝보다 18.7% 향상되었고, 동일한 휨하중에서 말뚝의 변위량은 강관말뚝보다 50% 감소하였다. 그리고 P-M 상관도로부터 연직하중을 받는 PCFT말뚝은 강관말뚝보다 휨내력이 크게 증가한 반면, 인발하중을 받는 PCFT말뚝은 강관말뚝보다 휨내력이 감소함을 알 수 있었다. 또한 시험말뚝에 대한 수평재하시험의 결과에 따르면 상부말뚝의 길이가 동일한 경우 PCFT 복합말뚝은 HCP보다 수평지지력이 60.5% 컸고, 두께가 12mm인 강관말뚝보다 35.8% 큰 것으로 나타났다.

Concrete filled steel tube (PCFT) piles, which compose PHC piles inside thin steel pipes, were developed to increase the flexural strength of the pile with respect to the horizontal load. In order to compare the flexural strength of PCFT pile with that of steel pipe pile, several flexural tests were performed on the PCFT and steel pipe piles with the same diameter and the P-M curves for both piles were constructed by the limit state design method. Four test piles were also installed and lateral pile load tests were performed to compare the lateral load capacities and lateral behaviors of the hybrid composite piles using PCFT piles and the existing piles such as HCP and steel pipe piles. The flexural test results showed that the flexural strength of PCFT piles was 18.7% higher than that of steel pipe piles with thickness of 12mm and the same diameter, and the mid-span deflection of piles was 50% lower than that of steel pipe piles at the same bending moment. From the P-M curves, it can be seen that the flexural strength of PCFT piles subjected to the vertical load is greater than that of steel pipe piles, but the flexural strength of PCFT piles subjected to the pullout load is lower than that of steel pipe piles. In addition, field pile load tests showed that the PCFT hybrid composite pile has 60.5% greater lateral load capacity than the HCP and 35.8% greater lateral load capacity than the steel pipe pile when the length of the upper pile in hybrid composite piles was the same.

References
  1. Bang, J.W., Hyun, J.H., Lee, B.Y., Lee, S.S., and Kim, Y.Y. (2013), "Flexural Strength of PHC Pile Reinforced with Infilled Concrete, Transverse and Longitudinal Reinforcements", Journal of the Korea Concrete Institute, Vol.25, No.1, pp.91-98.10.4334/JKCI.2013.25.1.091
  2. Davidson, H. L., Cass, P. G., Khilji, K. H., and McQuade, P. V. (1982), Laterally loaded drilled pier research, Report EL-2197, EPRI, 324p.
  3. Hyun, J.W., Bang, J.W, Lee, S.S., and Kim, Y.Y. (2012), "Shear Strength Enhancement of Hollow PHC Pile Reinforced with Infilled Concrete and Shear Reinforcement", Journal of the Korean Society of Civil Engineers, Vol.24, No.1, pp.71-78.
  4. KBSS (2015), Korea highway bridge design code (Limit state design), Korean Bridge and Structure Society.
  5. KS F 4306 (2014), Pre-tensioned spun high strength concrete piles, 53p.
  6. KGS (2015), Structural foundation design code, Korean Geotechnical Society, 894p.
  7. KSSC (2018), Korean steel structure design code and commentary (load and resistance factor design), Korean Society of Steel Construction, 463p.
  8. Meyerhof, G. G., Mathur, S. K., and Valsangkar, A. J. (1981), "Lateral Resistance and Deflection of Rigid Wall and Piles in Layered Soils", Canadian Geotechnical J., Vol.18, pp.159-170.10.1139/t81-021
  9. Paik, K.H. (2018), "Strength Characteristics of Hollow Prestressed Concrete Filled Steel Tube Piles for Hybrid Composite Piles", Journal of the Korean Geotechnical Society, Vol.34, No.1, pp.37-46.
  10. Piletech, Doosan Heavy Industries & Const., Hanmac Esng. and Korea Eng. Consultants (2008), Design and construction methods of bored hybrid composite pile that joins steel pipe and PHC piles using coupler, New Excellent Technology No. 556.
  11. WSDOT, Structural design recommendations of CFT and RCFT for bridge foundation, Washington State DOT Design Memorandum, 30p.
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 34
  • No :12
  • Pages :133-143
  • Received Date :2018. 12. 06
  • Accepted Date : 2018. 12. 20