All Issue

2019 Vol.35, Issue 9 Preview Page

Research Article

September 2019. pp. 15-28


Chae, S. G. (2018), Standard Design and Construction Practice for PHC Piles, GSENC Corp., p.14, p.173, p.174. (In Korean)


Cho, C. H. (2006), Bored pile method, ENG Book. (in Korean)


Choi, Y. K., Kwon, O. K., Lee, W. J., and Yeo, K. K., Park, M. C. (2019), A Study for Establishing of Behavior, Design and Construction on Prebored and Precast Piles (Development of Capacity Prediction Method and Chart for Prebored and precast Piles Considering Soil Types, Pile Penetration Lengths, Pile Diameter), Report No. KGS 2019-083, pp.21-45, 273-300. (In Korean)


Concrete Pile Construction Technical Association (2009), Foundation Structure Design Manual (Architecture), p. 8. (In Japanese)


FHWA (1983), Allowable stresses in piles, FHWA/RD-83/059, pp.41-44.


KATS (1983), KS F 4306 Pretensioned Spun High Strength Concrete Piles, 1983. 12. 17, pp.1-51. (In Korean)


Lee, I. M. (2014), Principles of Foundation Engineering, CIR, p. 121. (In Korean)


The Korea Land & Housing Corporation (2017), Appendix 1 Quality Test and Inspection Standards in Construction Specification, V1711, 2017. 8, p. Appendix 1-4. (In Korean)


Yea, G. G., Yun, D. H., Yun, D. K., and Choi, Y. K. (2019b), Study(II) on Development of Charts and formulae Predicting Allowable Axial Bearing Capacity for Prebored PHC Pile Socketed into Weathered Rock through Sandy Soil Layer - Improvement Measures of Current Design Method by Analyzing Current Design Data for Prebored PHC Piles -, JOURNAL OF THE KOREAN GEOTECHNICAL SOCIETY, Vol.35, No.8, August 2019, pp.31-42. (In Korean)


Yoo, N. J. etc. 20 Authors (2015), Design Specification and Commentary for Foundation Design, Korean Geotechnical Society, p.288. (In Korean)


OOPILE Ltd. (2018), Test frequency and test results for quality control. (In Korean)

  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 35
  • No :9
  • Pages :15-28
  • Received Date :2019. 06. 12
  • Revised Date :2019. 07. 19
  • Accepted Date : 2019. 07. 20