All Issue

2019 Vol.35, Issue 2 Preview Page

February 2019. pp. 37-51
Abstract


References
1 

Abbo, A. J. and Sloan, S. W. (1996), "An Automatic Load Stepping Algorithm with Error Control", International Journal for Numerical Methods in Engineering, 39, pp.1737-1759.

10.1002/(SICI)1097-0207(19960530)39:10<1737::AID-NME927>3.0.CO;2-5
2 

Been, K. and Jefferies, M. G. (1985), "A State Parameter for Sands", Géotechnique, Vol.35, No.2, pp.99-112.

10.1680/geot.1985.35.2.99
3 

Bolton, M. D. (1986), "The Strength and Dilatancy of Sand", Geotechnique, Vol.36, No.1, pp.65-78.

10.1680/geot.1986.36.1.65
4 

Coetzee, C. J., Vermeer, P. A., and Basson, A. H. (2005), "The Modelling of Anchors Using the Material Point Method", International Journal for Numerical and Analytical Methods in Geomechanics, 29, pp.879-895.

10.1002/nag.439
5 

Dafalias, Y. F. and Manzari, M. T. (2004), "Simple Plasticity Sand Model Accounting for Fabric Change Effects", Journal of Engineering Mechanics, Vol.130, No.6, pp.622-634.

10.1061/(ASCE)0733-9399(2004)130:6(622)
6 

Dafalias, Y. F., Papadimitriou, A. G., and Li, X. S. (2004), "Sand Plasticity Model Accounting for Inherent Fabric Anisotropy", Journal of Engineering Mechanics, Vol.130, No.11, p.1319.

10.1061/(ASCE)0733-9399(2004)130:11(1319)
7 

Dang, H. K. and Meguid, M. A. (2010), "Evaluating the Performance of an Explicit Dynamic Relaxation Technique in Analyzing Non-linear Geotechnical Engineering Problems", Computers and Geotechnics, Elsevier Ltd, 37, pp.125-131.

10.1016/j.compgeo.2009.08.004
8 

Fukushima, S. and Tatsuoka, F. (1984), "Strength and Deformation Characteristics of Saturated Sand at Extremely Low Pressures", Soils and Foundations, Vol.24, No.4, pp.30-48.

10.3208/sandf1972.24.4_30
9 

Gomes, R. C., Santos, J. A., Razavi, A. M., and Lopez-Caballero, F. (2016), "Validation of a Strategy to Predict Secant Shear Modulus and Damping of Soils with an Elastoplastic Model", KSCE Journal of Civil Engineering, Vol.20, No.2, pp.609-622.

10.1007/s12205-015-0516-8
10 

Ho, T. Y. K., Jardine, R. J., and Anh-Minh, N. (2011), "Large-displacement Interface Shear between Steel and Granular Media", Géotechnique, Vol.61, No.3, pp.221-234.

10.1680/geot.8.P.086
11 

Huang, W., Sheng, D., Sloan, S. W., and Yu, H. S. (2004), "Finite Element Analysis of Cone Penetration in Cohesionless Soil", Computers and Geotechnics, 31, pp.517-528.

10.1016/j.compgeo.2004.09.001
12 

Hügel, H. M., Henke, S., and Kinzler, S. (2008), "High-performance ABAQUS Simulations in Soil Mechanics", pp.192-205.

13 

Jamiolkowski, M., Lo Presti, D. C. F., and Manassero, M. (2003), "Evaluation of Relative Density and Shear Strength of Sands from CPT and DMT", Soil Behavior and Soft Ground Construction, pp.201-238.

10.1061/40659(2003)7
14 

Kardani, M., Nazem, M., Abbo, A. J., Sheng, D., and Sloan, S. W. (2012), "Refined h-adaptive Finite Element Procedure for Large Deformation Geotechnical Problems", Computational Mechanics, 49, pp.21-33.

10.1007/s00466-011-0624-3
15 

Kim, D. and Choo, Y. W. (2006), "Cyclic Threshold Shear Strains of Sands based on Pore Water Pressure Buildup and Variation of Deformation Characteristics", International Journal of Offshore and Polar Engineering, Vol.16, No.1, pp.57-64.

16 

Kishida, H. and Uesugi, M. (1987), "Tests of the Interface between Sand and Steel in the Simple Shear Apparatus", Géotechnique, Vol.37, No.1, pp.45-52.

10.1680/geot.1987.37.1.45
17 

Kramer, S. L. (1996), Geotechnical Earthquake Engineering, Prentice Hall, Upper Saddle River, NJ.

18 

Lam, S. Y., Ng, C. W. W., Leung, C. F., and Chan, S. H. (2009), "Centrifuge and Numerical Modeling of Axial Load Effects on Piles in Consolidating Ground", Canadian Geotechnical Journal, 46, pp.10-24.

10.1139/T08-095
19 

Li, X. S. (2002), "A Sand Model with State-dependent Dilatancy", Géotechnique, Vol.52, No.3, pp.173-186.

10.1680/geot.2002.52.3.173
20 

Li, X. S. and Dafalias, Y. F. (2000), "Dilatancy for Cohesionless Soils", Géotechnique, Vol.50, No.4, pp.449-460.

10.1680/geot.2000.50.4.449
21 

Li, X. S. and Dafalias, Y. F. (2002), "Constitutive Modeling of Inherently Anisotropic Sand behavior", Journal of Geotechnical and Geoenvironmental Engineering, Vol.128, No.10, pp.868-880.

10.1061/(ASCE)1090-0241(2002)128:10(868)
22 

Li, X. S., Dafalias, Y. F., and Wang, Z. (1999), "State-dependent Dilatancy in Critical-state Constitutive Modelling of Sand", Canadian Geotechnical Journal, 36, pp.599-611.

10.1139/t99-029
23 

Li, X. S. and Wang, Y. (1998), "Linear Representation of Steady-state Line for Sand", Journal of Geotechnical and Geoenvironmental Engineering, Vol.124, No.12, pp.1215-1217.

10.1061/(ASCE)1090-0241(1998)124:12(1215)
24 

Loukidis, D., Chakraborty, T., and Salgado, R. (2008), "Bearing Capacity of Strip Footings on Purely Frictional Soil under Eccentric and Inclined Loads", Canadian Geotechnical Journal, 45, pp.768-787.

10.1139/T08-015
25 

Loukidis, D. and Salgado, R. (2009), "Modeling Sand Response Using Two-surface Plasticity", Computers and Geotechnics, 36, pp.166-186.

10.1016/j.compgeo.2008.02.009
26 

Lubliner, J. (1990), Plasticity Theory, Macmillan, New York, New York.

2300749
27 

Manzari, M. T. and Dafalias, Y. F. (1997), "A Critical State Two-surface Plasticity Model for Sands", Géotechnique, Vol.47, No.2, pp.255-272.

10.1680/geot.1997.47.2.255
28 

Mohammadi, S. and Taiebat, H. (2015), "H-Adaptive Updated Lagrangian Approach for Large-Deformation Analysis of Slope Failure", International Journal of Geomechanics, Vol.15, No.6, pp.1-13.

10.1061/(ASCE)GM.1943-5622.0000440
29 

Nazem, M., Kardani, M., Carter, J. P., and Sheng, D. (2012), "A Comparative Study of Error Assessment Techniques for Dynamic Contact Problems of Geomechanics", Computers and Geotechnics, Elsevier Ltd, 40, pp.62-73.

10.1016/j.compgeo.2011.09.006
30 

Nazem, M., Sheng, D., and Carter, J. P. (2006), "Stress Integration and Mesh Refinement for Large Deformation in Geomechanics", International Journal for Numerical Methods in Engineering, 65, pp.1002-1027.

10.1002/nme.1470
31 

Nazem, M., Sheng, D., Carter, J. P., and Sloan, S. W. (2008), "Arbitrary Lagrangian - Eulerian Method for Large-strain Consolidation Problems", International Journal for Numerical and Analytical Methods in Geomechanics, 32, pp.1023-1050.

10.1002/nag.657
32 

Papadimitriou, A. G. and Bouckovalas, G. D. (2002), "Plasticity Model for Sand under Small and Large Cyclic Strains: A Multiaxial Formulation", Soil Dynamics and Earthquake Engineering, Vol.22, No.3, pp.191-204.

10.1016/S0267-7261(02)00009-X
33 

Richart, F., Hall, J., and Woods, R. (1970), Vibrations of Soils and Foundations, International series in theoretical and applied mechanics, Prentice-Hall, Englewood Cliffs, NJ, NJ.

34 

Sabetamal, H., Nazem, M., Carter, J. P., and Sloan, S. W. (2014), "Large Deformation Dynamic Analysis of Saturated Porous Media with Applications to Penetration Problems", Computers and Geotechnics, Elsevier Ltd, 55, pp.117-131.

10.1016/j.compgeo.2013.08.005
35 

Salgado, R. (1993), "Analysis of Penetration Resistance in Sands", University of California, Berkeley.

36 

Sheng, D., Nazem, M., and Carter, J. P. (2009), "Some Computational Aspects for Solving Deep Penetration Problems in Geomechanics", Computational Mechanics, 44, pp.549-561.

10.1007/s00466-009-0391-6
37 

Sheng, D. and Sloan, S. W. (2001), "Load Stepping Schemes for Critical State Models", International journal for numerical methods in eng, 50, pp.67-93.

10.1002/1097-0207(20010110)50:1<67::AID-NME22>3.0.CO;2-N
38 

Shmertmann, J. (1978), Guidelines for Cone Penetration Test: Performance and Design.

39 

Sloan, S. W., Abbo, A. J., and Sheng, D. (2001), "Refined Explicit Integration of Elastoplastic Models with Automatic Error Control", Engineering Computations, Vol.18, No.1/2, pp.121-154.

10.1108/02644400110365842
40 

Sloan, S. W. and Booker, J. R. (1986), "Removal of Singularities in Tresca and Mohr-Coulomb Yield Functions", Communications in Applied Numerical Methods, 2, pp.173-179.

10.1002/cnm.1630020208
41 

Sołowski, W. T. and Sloan, S. W. (2015), "Evaluation of Material Point Method for Use in Geotechnics", International Journal for Numerical and Analytical Methods in Geomechanics, 39, pp.685-701.

10.1002/nag.2321
42 

Stark, T. D. and Olson, S. M. (1995), "Liquefaction Resistance Using CPT and Field Case Histories", Journal of Geotechnical and Geoenvironmental Engineering, 121, pp.856-869.

10.1061/(ASCE)0733-9410(1995)121:12(856)
43 

Susila, E. and Hryciw, R. D. (2003), "Large Displacement FEM Modelling of the Cone Penetration Test (CPT) in Normally Consolidated Sand", International Journal for Numerical and Analytical Methods in Geomechanics, 27, pp.585-602.

10.1002/nag.287
44 

Uesugi, M. and Kishida, H. (1986), "Frictional Resistance at Yield between Dry Sand and Mild Steel", Soils and Foundations, Vol.26, No.4, pp.139-149.

10.3208/sandf1972.26.4_139
45 

Vavourakis, V., Loukidis, D., Charmpis, D. C., and Papanastasiou, P. (2013), "A Robust Finite Element Approach for Large Deformation Elastoplastic Plane-strain Problems", Finite Elements in Analysis and Design, Elsevier, 77, pp.1-15.

10.1016/j.finel.2013.08.003
46 

Verdugo, R. and Ishihara, K. (1996), "The Steady Sate of Sandy Soils", Soils and Foundations, Vol.36, No.2, pp.81-91.

10.3208/sandf.36.2_81
47 

Vucetic, M. (1994), "Cyclic Treshold Shear Strains in Soil", Journal of Geotechnical Engineering, Vol.120, No.12, pp.2208-2228.

10.1061/(ASCE)0733-9410(1994)120:12(2208)
48 

Woo, S. I. and Salgado, R. (2015), "Bounding Surface Modeling of Sand with Consideration of Fabric and Its Evolution during Monotonic Shearing", International Journal of Solids and Structures, 63, pp.227-288.

10.1016/j.ijsolstr.2015.03.005
49 

Woo, S. I., Seo, H., and Kim, J. (2017), "Critical-state-based Mohr-Coulomb Plasticity Model for Sands", Computers and Geotechnics, 92, pp.179-185.

10.1016/j.compgeo.2017.08.001
50 

Yu, L., Liu, J., Kong, X. J., and Hu, Y. (2008), "Three-dimensional RITSS Large Displacement Finite Element Method for Penetration of Foundations into Soil", Computers and Geotechnics, Vol.35, No.3, pp.372-382.

10.1016/j.compgeo.2007.08.007
Information
  • Publisher :The Korean Geotechnical Society
  • Publisher(Ko) :한국지반공학회
  • Journal Title :Journal of the Korean Geotechnical Society
  • Journal Title(Ko) :한국지반공학회 논문집
  • Volume : 35
  • No :2
  • Pages :37-51
  • Received Date :2019. 01. 08
  • Revised Date :2019. 01. 23
  • Accepted Date : 2019. 01. 24